بسم الله الرحمن الرحيم

Please Call +92 42 35715559 (11:00am - 08:30pm)

EAP300 FOR PRICE PLZ CALL

Be the first to review this product

Business Class Indoor High-power Long-range 800mW Wireless-N Access Point/WDS/Repeater with Smoke Detector Housing
Sign up for price alert

Availability: In stock

Rs 0.00
Engenius

 

Note: You can order online even without credit card. Just create account and place your order.

 

Mon - Sat 11:00am - 08:30pm 
Call us for more info at +92 42 35715559

 
For Computer Prices, Whatsapp 0321 4700923
For Laptop Prices, Whatsapp 0300 4635615
For Printer Prices, Whatsapp 0321 7908062
For any complaints, Whatsapp 0321 9478023

Description

Details

EAP300 offers a "smoke detector" look, and is a high-powered (up to 29dBm) wireless-n access point / WDS Bridge / WDS AP / Repeater operates seamlessly in the 2.4GHz frequency spectrum supporting 802.11 b/g/n standard high speed feature. It is the best way to add long range wireless capability to your existing wired network or to add bandwidth to your wireless installation. EAP300 features high wireless output power and receive sensitivity along with antenna diversity. High output power and high sensitivity extend wireless coverage to reduce the roaming between access points and to provide a reliable wireless connection. It also reduces the total cost of ownership on hardware.

Technical Specifications

Hardware
RF: 2.4 GHz Frequency Band
Standard: IEEE 802.11b/g/n
IEEE 802.11b/g: 2.400~2.484 GHz
Data Rate: Up to 300 Mbps
Memory: 32MB
Flash Memory: 4MB

Antenna
Internal 5 dBi Omni-Directional Antenna (diversity support)

Physical Interface
1 x RJ-45 Fast Ethernet (10/100 Mbps)
1 x Reset Button
Power Jack

LEDs Status
Power
LAN (10/100 Mbps)
WLAN (Wireless Connection)

Power Requirements 
Power Supply: 90 to 240 VDC ± 10%, 50/60 Hz
(depends on different countries)
Active Ethernet (Power-over-Ethernet, IEEE 802.3af)
Power Adapter (United States) 48VDC/0.375A
Device: 12V/1A

Modulations 
OFDM: BPSK, QPSK, 16-QAM, 64-QAM, DBPSK, DQPSK, CCK

Operating Channels
2.4 GHz: US/Canada 1-11

Receiver Sensitivity
802.11b (2.412~2.472 GHz) best ≤ -98 dBm
802.11g (2.412~2.472 GHz) best ≤ -93 dBm
802.11n (2.412~2.472 GHz) best ≤ -93 dBm

Available Transmit Power
(Max. Power may be different depending on local regulations)

802.11b (2.412~2.472 GHz)
29 dBm @ 1~11 Mbps 
802.11g (2.412~2.472 GHz)
29 dBm @ 6 Mbps
29 dBm @ 9 Mbps
28 dBm @ 12 Mbps
28 dBm @ 18 Mbps 
24 dBm @ 24 Mbps
24 dBm @ 36 Mbps
23 dBm @ 48 Mbps
23 dBm @ 54 Mbps 

802.11n (2.412~2.472 GHz)
26 dBm @ MCS0/MCS8
26 dBm @ MCS1/MCS9
25 dBm @ MCS2/MCS10
25 dBm @ MCS3/MCS11
24 dBm @ MCS4/MCS12
24 dBm @ MCS5/MCS13
23 dBm @ MCS6/MCS14
23 dBm @ MCS7/MCS15 

Software

Topology 
Infrastructure/Ad-Hoc

Operation Modes 
Access Point, WDS Bridge, WDS Access Point, Universal Repeater

Multiple BSSID 
Supports up to 8 BSSIDs per radio

LAN
IP (check validity and DHCP server IP range) 

DHCP Server
DHCP range, lease time, client list

SSID-to-VLAN Tagging
Supports 802.1q SSID-to-VLAN tagging

Spanning Tree
Supports 802.1d Spanning Tree Protocol

Wireless 
Wireless Mode: 11b/11g/11n
Channel selection (settings vary by country)
Channel bandwidth (Auto, 20 MHz, 40 MHz)
Transmission rate:
2.4 GHz: 11n only, 11b/g/n mix, 11b only, 11b/g, 11g only

QoS
WMM  (Wireless Multimedia)

VPN
Pass-through (PPTP, L2TP, IPSec)

WPS
Software only 

Management

Tx Power Control:
Adjust transmit power by dBm

Configuration:
Web-based configuration (http)/Telnet

Telnet Server: 
CLI

Firmware Upgrade: 
Via web browser, settings are reserved after upgrade

Administrator Setting: 
Administrator Username and Password Change

Reset Setting: 
Reboot (press 1 second).
Reset to factory default (press 10 seconds)

System Monitoring: 
Status Statistic and Event Log

SNMP: 
V1, V2c

MIB: 
MIB I, MIB II (RFC1213) and private MIB

Traffic Measurement: 
Per interface

Auto-channel Selection: 
Automatically selecting least congested channel

Bandwidth Measurement: 
IP range and bandwidth management

Backup and Restore: 
Save and restore settings through Web interface

Diagnosis: 
IP pinging statistics

Wireless / Network 
PPPoE: Point-to-Point Protocol over Ethernet in Client Router mode
(this function will keep trying when failed or disconnected)
PPTP: Point-to-Point Tunneling Protocol (PPTP) is a method for implementing virtual private networks

Wireless Security
WPA/WPA2 Personal (WPA-PSK using TKIP or AES)
WPA/WPA2 Enterprise (WPA-EAP using TKIP)
802.1X RADIUS Authenticator: MD5/TLS/TTLS, PEAP
SSID broadcast enable/disable
MAC Address Filtering, Up to 50 field
L2 Isolation (Access Point mode)
Wireless STA (Client) connected list (Idle/Connection Time, Pkt statistics)

Environmental & Physical

Temperature Range 
Operating: 0 to 50ºC (32º to 122ºF)
Storage: -20ºC to 60ºC (-4Fº to 140ºF)

Humidity (non-condensing)
Operating: 90% or less
Storage: 90% or less

Certifications 
FCC, IC

Maximum data rates are based on IEEE 802.11 standards. Actual throughput and range may vary depending on many factors including environmental conditions, distance between devices, radio interference in the operating environment, and mix of devices in the network. Features and specifications subject to change without notice. Trademarks and registered trademarks are the property of their respective owners. For United States of America: Copyright ©2013 EnGenius Technologies, Inc. All rights reserved.

Dimensions & Weights

EAP300 Device 
Weight: 0.62 lbs.
Diameter: 4.73”
Height: 1.97”

Package Contents
EAP300 N300 Indoor Access Point
12V/1A Power Adapter
Ceiling Mount and Wall Screw Kit
Mounting Bracket
RJ-45 Ethernet Cable
Quick Installation Guide
CD with User Manual

Additional Info

Additional Info

Manufacturer Engenius
Price Rs 0.00

Reviews

Write Your Own Review

You're reviewing: EAP300 FOR PRICE PLZ CALL

Tags

Tags

Use spaces to separate tags. Use single quotes (') for phrases.

You may also be interested in the following products